Cooling Your Home Naturally

Keeping cool indoors when it is hot outdoors is a problem. The sun beating down on our homes causes indoor temperatures to rise to uncomfortable levels. Air conditioning provides some relief. But the initial costs of installing an air conditioner and the electricity costs to run it can be high. In addition, conventional air conditioners use refrigerants made of chlorine compounds, suspected contributors to the depletion of the ozone layer and global warming. But there are alternatives to air conditioning. This information provides some common sense suggestions and low-cost retrofit options to help you "keep your cool"- and save electricity.

Staying Cool

An alternative way to maintain a cool house or reduce air conditioning use is natural (or passive) cooling. Passive cooling uses non-mechanical methods to maintain a comfortable indoor temperature.

The most effective method to cool your home is to keep the heat from building up in the first place. The primary source of heat buildup (i.e., gain) is sunlight absorbed by your house through the roof, walls, and windows. Secondary sources are heat-generating appliances in the home and air leakage. Specific methods to prevent heat gain include reflecting heat (i.e., sunlight) away from your house, blocking the heat, removing built up heat, and reducing or eliminating heat generating sources in your home.

Reflecting Heat Away

The most effective method to cool your home is to keep the heat from building up in the first place. Dull, dark colored home exteriors absorb 70% to 90% of the radiant energy from the sun that strikes the home's surfaces. Some of this absorbed energy is then transferred into your home by way of conduction, resulting in heat gain. In contrast, light-colored surfaces effectively reflect most of the heat away from your home.

Installing a radiant barrier

Radiant barriers are easy to install. It does not matter which way the shiny surface faces - up or down. But you must install it on the underside of your roof - not horizontally over the ceiling, and the barrier must face an airspace.

For your own comfort while in the attic, install the radiant barrier on a cool, cloudy day. Use plywood walk boards or wooden planks over the ceiling joists for support. Caution: Do not step between the ceiling joists, or you may fall through the ceiling.

Staple the foil to the bottom or side of the rafters, draping it from rafter to rafter. Do not worry about a tight fit or small tears in the fabric; radiant transfer is not affected by air movement. The staples should be no more than 2 to 3 inches (5 to 8 centimeters) apart to prevent air circulation from loosening or detaching the radiant barrier. Use a caulking gun to apply a thin bead of construction adhesive to the rafters along the seams of the foil barrier. This will make the installation permanent.

Roofs

About a third of the unwanted heat that builds up in your home comes in through the roof. This is hard to control with traditional roofing materials. For example, unlike most light colored surfaces, even white asphalt and fiberglass shingles absorb 70% of the solar radiation. One good solution is to apply a reflective coating to your existing roof. Two standard roofing coatings are available at your local hardware store or lumberyard. They have both waterproof and reflective properties and are marketed primarily for mobile homes and recreational vehicles. One coating is white latex that you can apply over many common roofing materials, such as asphalt and fiberglass shingles, tar paper, and metal.

A second coating is asphalt based and contains glass fibers and aluminum particles. You can apply it to most metal and asphalt roofs. Because it has a tacky surface, it attracts dust, which reduces its reflective somewhat.

Another way to reflect heat is to install a radiant barrier on the underside of your roof. A radiant barrier is simply a sheet of aluminum foil with a paper backing. When installed correctly, a radiant barrier can reduce heat gains through your ceiling by about 25%. (see box for information on installing a radiant barrier.)

Radiant-barrier materials cost between $0.13 per square foot ($1.44 per square meter) for a single-layer product with a kraft-paper backing and $0.30 per square foot ($3.33 per square meter) for a vented multiflora product with a fiber-reinforced backing. The latter product doubles as insulation.

Walls

Wall color is not as important as roof color, but does affect heat gain somewhat. White exterior walls absorb less heat than dark walls, and light, bright walls increase the longevity of siding, particularly on the east, west, and south sides of the house.

Windows

Roughly 40% of the unwanted heat that builds up in your home comes in through windows. Reflective window coatings are one way to reflect heat away from your home. These coatings are plastic sheets treated with dyes or thin layers of metal. Besides keeping your house cooler, these reflective coatings cut glare and reduce fading of furniture, draperies, and carpeting.

Two main types of coatings include sun-control films and combination films. Sun-control films are best for warmer climates because they can reflect as much as 80% of the incoming sunlight. Many of these films are tinted, however, and tend to reduce light transmission as much as they reduce heat, thereby darkening the room.

Combination films allow some light into a room but they also let some heat in and prevent interior heat from escaping. These films are best for climates that have both hot and cold seasons. Investigate the different film options carefully to select the film that best meets your needs. Note: do not place reflective coatings on south facing windows if you want to take advantage of heat gain during the winter. The coatings are applied to the interior surface of the window. Although you can apply the films yourself, it is a good idea to have a professional install the coatings, particularly if you have several large windows. This will ensure a more durable installation and a more aesthetically pleasing look.

Blocking the Heat

Two excellent methods to block heat are insulation and shading. Insulation helps keep your home comfortable and saves money on mechanical cooling systems such as air conditioners and electric fans. Shading devices block the sun's rays and absorb or reflect the solar heat.

Insulation

Weatherization measures - such as insulating, weather stripping, and caulking - help seal and protect your house against the summer heat in addition to keeping out the winter cold. The attic is a good place to start insulating because it is a major source of heat gain. Adequately insulating the attic protects the upper floors of a house. Recommended attic insulation levels depend on where you live and the type of heating system you use. For most climates, you want a minimum of R-30. In climates with extremely cold winters, you may want as much as R-49.

Wall insulation is not as important for cooling as attic insulation because outdoor temperatures are not as hot as attic temperatures. Also, floor insulation has little or no effect on cooling.

Although unintentional infiltration of outside air is not a major contributor to inside temperature, it is still a good idea to keep it out. Outside air can infiltrate your home around poorly sealed doors, windows, electrical outlets, and through openings in foundations and exterior walls. Thorough caulking and weather stripping will control most of these air leaks.

Shading

Shading your home can reduce indoor temperatures by as much as 20°f (11°c). Effective shading can be provided by trees and other vegetation and exterior or interior shades.

Landscaping

Landscaping is a natural and beautiful way to shade your home and block the sun. A well placed tree, bush, or vine can deliver effective shade and add to the aesthetic value of your property. When designing your landscaping, use plants native to your area that survive with minimal care. Trees that lose their leaves in the fall (i.e., deciduous) help cut cooling energy costs the most. When selectively placed around a house, they provide excellent protection from the summer sun and permit winter sunlight to reach and warm your house. The height, growth rate, branch spread, and shape are all factors to consider in choosing a tree. Vines are a quick way to provide shading and cooling. Grown on trellises, vines can shade windows or the whole side of a house. Ask your local nursery which vine is best suited to your climate and needs.

Besides providing shade, trees and vines create a cool microclimate that dramatically reduces the temperature (by as much as (9°f [5°c]) in the surrounding area. During photosynthesis, large amounts of water vapor escape through the leaves, cooling the passing air. and the generally dark and coarse leaves absorb solar radiation. You might also consider low ground cover such as grass, small plants, and bushes. A grass-covered lawn is usually 10°f (6°c) cooler than bare ground in the summer. If you are in an arid or semiarid climate, consider native ground covers that require little water.

Planning Your Planting

Placement of vegetation is important when landscaping your home. The following are suggestions to help you gain the most from vegetation.

• Plant trees on the northeast-southeast and the northwest-southwest sides of your house. Unless you live in a climate where it is hot year round, do not plant trees directly to the south. Even the bare branches of mature deciduous trees can significantly reduce the amount of sun reaching your house in the winter.
• Plant trees and shrubs so they can direct breezes. Do not place a dense line of evergreen trees where they will block the flow of cool air around or through them.
• Set trellises away from your house to allow air to circulate and keep the vines from attaching to your house's facade and damaging its exterior. Placing vegetation too close to your house can trap heat and make the air around your house even warmer.
• Do not plant trees or large bushes where their roots can damage septic tanks, sewer lines, underground wires, or your house's foundation.
• Make sure the plants you choose can withstand local weather extremes.

Shading Devices

Both exterior and interior shades control heat gain. Exterior shades are generally more effective than interior shades because they block sunlight before it enters windows. When deciding which devices to use and where to use them, consider whether you are willing to open and close them daily or just put them up for the hottest season. You also want to know how they will affect ventilation.

Exterior shading devices include awnings, lovers, shutters, rolling shutters and shades, and solar screens. Awnings are very effective because the block direct sunlight. They are usually made of fabric or metal and are attached above the window and extend down and out. A properly installed awning can reduce heat gain up to 65% on southern windows and 77% on eastern windows. A light colored awning does double duty by also reflecting sunlight.

Maintaining a gap between the top of the awning and the side of the house helps vent accumulated heat from under a solid- surface awning. If you live in a climate with cold winters, you will want to remove awnings for winter storage, or by retractable ones, to take advantage of winter heat gain.

The amount of drop (how far down the awing comes) depends on which side of your house the window is on. An east or west window needs a drop of 65% to 75% of the window height. A south-facing window only needs a drop of 45% to 60% for the same amount of shade. A pleasing angle to the eye for mounting and awning is 45°. Make sure the awning does not project into the path of foot traffic unless it is at least 6 feet 8 inches (2 meters) from the ground.

One disadvantage of awnings is that they can block views, particularly on the east and west sides. However, slatted awnings do allow limited viewing through the top parts of windows.

Louvers are attractive because their adjustable slats control the level of sunlight slats control the level of sunlight entering your home and, depending on the design, can be adjusted from inside or outside your house. The slats can be vertical or horizontal. Louvers remain fixed and are attached to the exteriors of window frames.

Shutters are movable wooden or metal covering that, when closed, keep sunlight out. Shutters are either solid or slatted with fixed or adjustable slats. Besides reducing heat gain, they can provide privacy and security. Some shutters help insulate windows when it is cold outside.

Rolling shutters have a series of horizontal slats that run down along a track. Rolling shades use a fabric. These are the most expensive shading options, but the work well and can provide security. Many exterior rolling shutters or shades can be conveniently controlled from the inside. One disadvantage is that when fully extended, the block all light.

Solar screens resemble standard window screens except they keep direct sunlight from entering the window, cut glare, and block light without blocking the view or elimination air flow. They also provide privacy by restricting the view of the interior from outside your house. Solar screens come in a variety of colors and screening materials to compliment any home. Although do-it-yourself kits are available, these screens will not last as long as professionally built screens.

Although interior shading is not as effective as exterior shading, it is worthwhile if none of the previously mentioned techniques are possible. There are several ways to block the sun's heat from inside your house.

Draperies and curtains made of tightly woven, light-colored, opaque fabrics reflect more of the sun's rays than they let through. The tighter the curtain is against the wall around the window, the better it will prevent heat gain. Two layers of draperies improve the effectiveness of the draperies' insulation when it is either hot or cold outside.

Venetian blinds, although not as effective as draperies, can be adjusted to let in some light and air while reflecting the sun's heat. Some newer blinds are coated with reflective finishes. To be effective, the reflective surfaces must face the outdoors. Some interior cellular (honeycombed) shades also come with reflective mylar coatings. But they block natural light and restrict air flow.

Opaque roller shades are effective when fully drawn but also block light and restrict air flow.

Removing Built-Up Heat

Nothing feels better on a hot day than a cool breeze. Encouraging cool air to enter your house forces warm air out, keeping your house comfortably cool. However, this strategy only works when the inside temperature is higher than the outside temperature.

Natural ventilation maintains indoor temperatures close to outdoor temperatures close to outdoor temperatures and helps remove heat from your home. But only ventilated during the coolest parts of the day or night, and seal off your house from the hot sun and air during the hottest parts of the day. The climate you live in determines the best ventilation strategy. In areas with cool nights and very hot days, let the night air in to cool your house. By the time the interior heats up, and the outside air should be cooler and can be allowed indoors.

In climates with day time breezes, open windows on the side from where the breeze is coming and on the opposite side of the house. Keep interior doors open to encourage whole house ventilation. If your location lacks consistent breezes, create them by opening the windows at the lowest and highest points in your house. This natural "thermo siphoning," or "chimney," effect can be taken a step further by adding a clerestory or a vented skylight.

In hot, humid climates where temperature swings between day and night are mall, ventilate when humidity is not excessive. Ventilating your attic greatly reduces the amount of accumulated heat, which eventually works its way into the main part of your house. Ventilated attics are about 30°f (16°c) cooler than unventilated attics. Properly sized and placed louvers and roof vents help prevent moisture buildup and overheating in your attic.

Reducing Heat-Generating Sources

Often-overlooked sources of interior heat gain are lights and household appliances, such as ovens, dishwashers, and dryers. Because most of the energy that incandescent lamps use is given off as heat, use them only when necessary. Take advantage of daylight to illuminate your house, and consider switching to compact fluorescent lamps. These use about 75% less energy than incandescent lamps, and emit 90% less heat for the same amount of light.

New, energy efficient appliances generate less heat and use less energy.

Many household appliances generate a lot of heat. When possible, use them in the morning or late evening when you can better tolerate the extra heat. Consider cooking on an outside barbecue grill or use a microwave oven, which does not generate as much heat and uses less energy than a gas or electric range.

Washers, dryers, dishwashers, and water heaters also generate large amounts of heat and humidity. To gain the most benefit, seal off your laundry room and water heater from the rest of the house.

New, energy efficient appliances generate less heat and use less energy. When it is time to purchase new appliances, make sure the are energy efficient. All refrigerators, dishwashers, and dryers display an energy guide label indicating the annual estimated cost for operating the appliance or a standardized energy efficiency ratio. Compare appliances and buy the most efficient models for your needs.

Saving Energy

Using any or all of these strategies will help keep you cool. Even if you use air conditioning, many of these strategies, may not be enough. Sometimes you need to supplement natural cooling with mechanical devices. Fans and evaporative coolers can supplement your cooling strategies and cost less to install and run than air conditioners.

Ceiling fans make you feel cooler. Their effect is equivalent to lowering the air temperature by about 4°f (2°c). Evaporative coolers use about one-fourth the energy of conventional air conditioners.

Many utility companies offer rebates and other cost incentives when you purchase or install energy saving products, such as insulation and energy efficient lighting and appliances. Contact your local utility company to see what it offers in the way of incentives.

Cooling Strategies Checklist

cooling strategies to consider :

• lighten roof and exterior wall color
• replace/coat roof with bright white or shiny material
• install a radiant barrier
• add reflective coatings to windows
• insulate attic and walls
• caulk and weather strip to seal air leaks
• add shade trees, bushes, or vines
• add exterior awnings and shades
• add interior drapes and shades
• ventilate attic
• increase natural ventilation
• isolate heat-generating appliances
• replace heat-generating appliances
• replace light bulbs with energy-efficient fluorescent's

Common Mistakes Made with Money and How to Avoid Them

Everybody makes mistakes with their money. The important thing is to keep them to a minimum. And one of the best ways to accomplish that is to learn from the mistakes of others. Here is our list of the top mistakes people make with their money, and what you can do to avoid these mistakes in the first place.

1. Buying items you don't need...and paying extra for them in interest. Every time you have an urge to do a little "impulse buying" and you use your credit card but you don't pay in full by the due date, you could be paying interest on that purchase for months or years to come. Spending money for something you really don't need can be a big waste of your money. But you can make the matter worse, a lot worse, by putting the purchase on a credit card and paying monthly interest charges.

Research major purchases and comparison shop before you buy. Ask yourself if you really need the item. Even better, wait a day or two, or just a few hours, to think things over rather than making a quick and costly decision you may come to regret.

There are good reasons to pay for major purchases with a credit card, such as extra protections if you have problems with the items. But if you charge a purchase with a credit card instead of paying by cash, check or debit card (which automatically deducts the money from your bank account), be smart about how you repay. For example, take advantage of offers of "zero-percent interest" on credit card purchases for a certain number of months (but understand when and how interest charges could begin).

And, pay the entire balance on your credit card or as much as you can to avoid or minimize interest charges, which can add up significantly.

If you pay only the minimum amount due on your credit card, you may end up paying more in interest charges than what the item cost you to begin with. Example: If you pay only the minimum payment due on a $1,000 computer, let's say it's about $20 a month, your total cost at an Annual Percentage Rate of more than 18 percent can be close to $3,000, and it will take you nearly 19 years to pay it off.

2. Getting too deeply in debt. Being able to borrow allows us to buy clothes or computers, take a vacation or purchase a home or a car. But taking on too much debt can be a problem, and each year millions of adults of all ages find themselves struggling to pay their loans, credit cards and other bills.

3. Learn to be a good money manager. Also recognize the warning signs of a serious debt problem. These may include borrowing money to make payments on loans you already have, deliberately paying bills late, and putting off doctor visits or other important activities because you think you don't have enough money.

If you believe you're experiencing debt overload, take corrective measures. For example, try to pay off your highest interest rate loans (usually your credit cards) as soon as possible, even if you have higher balances on other loans. For new purchases, instead of using your credit card, try paying with cash, a check or a debit card.

There are also reliable credit counselors you can turn to for help at little or no cost. Unfortunately, you also need to be aware that there are scams masquerading as 'credit repair clinics' and other companies, such as 'debt consolidators', that may charge big fees for unfulfilled promises or services you can perform on your own.

4. Paying bills late or otherwise tarnishing your reputation. Companies called credit bureaus prepare credit reports for use by lenders, employers, insurance companies, landlords and others who need to know someone's financial reliability, based largely on each person's track record paying bills and debts. Credit bureaus, lenders and other companies also produce "credit scores" that attempt to summarize and evaluate a person's credit record using a point system.

While one or two late payments on your loans or other regular commitments (such as rent or phone bills) over a long period may not seriously damage your credit record, making a habit of it will count against you. Over time you could be charged a higher interest rate on your credit card or a loan that you really want and need. You could be turned down for a job or an apartment. It could cost you extra when you apply for auto insurance. Your credit record will also be damaged by a bankruptcy filing or a court order to pay money as a result of a lawsuit.

So, pay your monthly bills on time. Also, periodically review your credit reports from to make sure their information accurately reflects the accounts you have.

5. Having too many credit cards. Two to four cards (including any from department stores, oil companies and other retailers) is the right number for most adults. Why not more cards?

The more credit cards you carry, the more inclined you may be to use them for costly impulse buying. In addition, each card you own - even the ones you don't use - represents money that you could borrow up to the card's spending limit. If you apply for new credit you will be seen as someone who, in theory, could get much deeper in debt and you may only qualify for a smaller or costlier loan.

Also be aware that card companies aggressively market their products on college campuses, at concerts, ball games or other events often attended by young adults. Their offers may seem tempting and even harmless - perhaps a free T-shirt or Frisbee, or 10 percent off your first purchase if you just fill out an application for a new card - but you've got to consider the possible consequences we've just described. Don't sign up for a credit card just to get a great-looking T-shirt. You may be better off buying that shirt at the store for $14.95 and saving yourself the potential costs and troubles from that extra card.

6. Not watching your expenses. It's very easy to overspend in some areas and take away from other priorities, including your long-term savings. Our suggestion is to try any system - ranging from a computer-based budget program to hand-written notes - that will help you keep track of your spending each month and enable you to set and stick to limits you consider appropriate. A budget doesn't have to be complicated, intimidating or painful - just something that works for you in getting a handle on your spending.

7. Not saving for your future. We know it can be tough to scrape together enough money to pay for a place to live, a car and other expenses each month. But experts say it's also important for young people to save money for their long-term goals, too, including perhaps buying a home, owning a business or saving for your retirement (even though it may be 40 or 50 years away).

Start by "paying yourself first". That means even before you pay your bills each month you should put money into savings for your future. Often the simplest way is to arrange with your bank or employer to automatically transfer a certain amount each month to a savings account or to purchase a Savings Bond or an investment, such as a mutual fund that buys stocks and bonds.

Even if you start with just $25 or $50 a month you'll be significantly closer to your goal. The important thing is to start saving as early as you can - even saving for your retirement when that seems light-years away - so you can benefit from the effect of compound interest. Compound interest refers to when an investment earns interest, and later that combined amount earns more interest, and on and on until a much larger sum of money is the result after many years.

Banking institutions pay interest on savings accounts that they offer. However, bank deposits aren't the only way to make your money grow. Investments, which include stocks, bonds and mutual funds, can be attractive alternatives to bank deposits because they often provide a higher rate of return over long periods, but remember that there is the potential for a temporary or permanent loss in value.

8. Paying too much in fees. Whenever possible, use your own financial institution's automated teller machines or the ATMs owned by financial institutions that don't charge fees to non-customers. You can pay $1 to $4 in fees if you get cash from an ATM that isn't owned by your financial institution or isn't part of an ATM "network" that your bank belongs to.

Try not to "bounce" checks - that is, writing checks for more money than you have in your account, which can trigger fees from your financial institution (about $15 to $30 for each check) and from merchants. The best precaution is to keep your checkbook up to date and closely monitor your balance, which is easier to do with online and telephone banking. Remember to record your debit card transactions from ATMs and merchants so that you will be sure to have enough money in your account when those withdrawals are processed by you bank.

Financial institutions also offer "overdraft protection" services that can help you avoid the embarrassment and inconvenience of having a check returned to a merchant. But be careful before signing up because these programs come with their own costs. Whenever possible, use your own financial institution's automated teller machines or the ATMs owned by institutions that don't charge fees to non-customers.

Pay off your credit card balance each month, if possible, so you can avoid or minimize interest charges. Also send in your payment on time to avoid additional fees. If you don't expect to pay your credit card bill in full most months, consider using a card with a low interest rate and a generous "grace period" (the number of days before the card company starts charging you interest on new purchases).

9. Not taking responsibility for your finances. Do a little comparison shopping to find accounts that match your needs at the right cost. Be sure to review your bills and bank statements as soon as possible after they arrive or monitor your accounts periodically online or by telephone. You want to make sure there are no errors, unauthorized charges or indications that a thief is using your identity to commit fraud.

Keep copies of any contracts or other documents that describe your bank accounts, so you can refer to them in a dispute. Also remember that the quickest way to fix a problem usually is to work directly with your bank or other service provider.

Protecting Your Home from Fire and Carbon Monoxide

Safety & You

Everyone wants to live in a safe and worry free environment with their families, spouse, and children. However, most people are closer to a disaster waiting to happen than they think. Safety may not be an issue that comes to mind as you go about your daily routine. You may feel safe. Yet, lurking in your home are dangers that can take lives and destroy property.

Fire Facts

Thousands of people die from fire every year. Most residential fire deaths occur because of inhalation of toxic gas, rather than contact with the flames. The tragedy is that many of these deaths could be prevented by taking a few precautions.

General Fire Prevention Tips

• Do not plug too many appliances into an electrical outlet.
• Make sure that combustibles are not too close to heaters, stoves and fireplaces.
• Never smoke in bed, or leave a burning cigarette in an ashtray.
• Do not use damaged or frayed electrical cords or extension cords.
• Keep matches and lighters out of the reach of children.
• Teach your children about the dangers of playing with fire.
• Never use extension cords with heating or air conditioning equipment.
• Purchase smoke alarms and fire extinguishers for each floor of your home.

Have an Emergency Escape Plan! Practice it frequently!

• Develop an emergency exit plan and an alternate exit plan. The most obvious way out may be blocked by fire. A window will usually be the second way out of a bedroom. Make sure that screens or storm windows can be easily removed. If you live in a two story home, you should have an escape ladder for each occupied bedroom. Escape ladders are available for purchase, and they can easily be stored under a bed or in a closet.
• Establish a meeting place outside your home to be sure everyone has escaped. Every family member should participate in practicing escape drills at least two times per year.
• In the event of fire, do not stop to get dressed or gather valuables. Seconds count - do not search for the family pet.
• Teach your family that in a fire they must stay low to the floor to avoid smoke and intense heat. Passageways may be completely filled with dense smoke, so everyone should practice exiting on their hands and knees while blindfolded.
• Train family members to feel a closed door before exiting. If the door is warm, open it slowly, and close it quickly if heat or smoke rushes in.
• Establish a rule that once you're out, you never re-enter under any circumstances. As soon as two people have reached the meeting place, one should call 911 from a neighbor's house.

Smoke Alarms

Through education and media campaigns, most people now realize the importance of smoke alarms, and most homes in North America have them.

Recommendations:

• Purchase a smoke alarm for every floor of your home, and read the instructions on how to use it and where to position it.
• Smoke alarms should be placed near bedrooms, either on the ceiling or six to twelve inches below the ceiling on the wall.
• Local codes may require additional alarms. Check with your fire department or building code official.
• Locate smoke alarms away from air vents.
• Test your alarms regularly to ensure that they still work.
• If you have a battery powered alarm, change the battery every six months when you change your clocks.
• For maximum protection, install BOTH ionization and photoelectric smoke alarms in the home for the optimum detection of fast flaming fires and slow smoldering fires.

Fire Extinguishers

To guard against small fires or to keep a small fire from developing into a big one, every home should be equipped with a fire extinguisher. Because almost all fires are small at first, they might be contained if a fire extinguisher is handy and used properly. You should take care, however, to select the right kind of fire extinguisher, because there are different ones for different kinds of fires. Install fire extinguishers on every level of the home and include the kitchen, basement and garage.

Selecting a Fire Extinguisher

Extinguishers are classified according to the class of fire for which they are suitable. The four classes of fires are A, B, C, D:

• Class A fires involve common combustibles such as wood, paper, cloth, rubber, trash and plastics. They are common in typical commercial and home settings.
• Class B fires involve flammable liquids, solvents, oil, gasoline, paints, lacquers and other oil-based products. Class B fires often spread rapidly. Unless they are properly suppressed, they can re-flash after the flames have been extinguished.
• Class C fires involve energized equipment such as wiring, controls, motors, machinery or appliances. They can be caused by a spark, a power surge, or a short circuit and typically occur in locations that may be difficult to see or reach.
• Class D fires involve combustible metals.

A typical home or office fire extinguisher should have an ABC rating.

Carbon Monoxide

One of the greatest threats to your safety is the quality of air within your home. Carbon monoxide (CO) is a subtle yet dangerous threat because the gas is colorless, odorless and tasteless.

Each year, hundreds of people die from carbon monoxide poisoning. Thousands of other people suffer the effects of the gas without realizing it. Because CO symptoms mimic the flu and other common illnesses, CO poisoning can be easily missed during a routine medical examination.

CO is produced when any fuel does not burn completely because of insufficient oxygen. Mild exposure to CO gives most people a slight headache, nausea, vomiting, fatigue ("flu-like" symptoms) followed by a throbbing headache, drowsiness, confusion, and fast heart rate. If the entire family becomes ill after a few hours in the home, and feels better when they leave the home, carbon monoxide poisoning should be suspected.

Possible sources of CO include:

• Furnace or boiler
• Gas or fuel-oil water heater
• Gas or wood fireplace
• Gas kitchen range
• Plugged, rusted, disconnected, or defective chimneys or vents
• Back drafting of combustion gases into the home
• Automobiles in attached garages

Certain clues can indicate a carbon monoxide problem. Check to see if you have any of the following:

• Rusting or streaking on chimney or vent
• Loose or missing furnace panel
• Soot on venting or appliances
• Loose or disconnected venting
• Debris or soot falling from chimney
• Moisture on interior side of windows

CO can be produced and spill into your home without any of the preceding clues present. Heating appliances that appear to be operating correctly can still be sources of CO. Burning charcoal or wood produces CO that can spill into the home. Gasoline engines, when first started, produce large amounts of CO. Autos in attached garages are often sources of CO.

How To Protect Yourself

To avoid CO exposure in the home, it is important to:

• Make sure heating appliances are installed and used in accordance with manufacturer's instructions.
• Make sure chimneys and vents draw all gases out of the home.
• Have the heating system, chimney and vents inspected and serviced annually by a qualified heating contractor.
• Never use charcoal grills indoors.
• Never heat your home with a gas kitchen range.
• Always use a kitchen range hood, vented to the outdoors, when cooking on a gas range.
• Never warm-up or run vehicles or other gasoline engines in garages or indoors.

The Consumer Product Safety Commission recommends that every residence with fuel burning appliances be equipped with at least one CO alarm. For added protection, place one on every level of the home. Read and follow manufacturers' instructions.

If your alarm indicates high levels of carbon monoxide in your home:

• Immediately move outdoors to fresh air and do a head count
• Call your emergency services
• Do not re-enter the home until emergency service responders have arrived, aired out the house, and determined it is safe to re-enter
• Correct the problem before starting the heating appliances
• If a carbon monoxide alarm sounds again, repeat the above steps. Do not ignore alarms.

Fires are traumatizing and frightening, as is a carbon monoxide incident. It is essential to fully recognize the hazards of fire and carbon monoxide poisoning and to take preventative action. A regular home inspection, smoke and carbon monoxide alarms, fire extinguishers and an emergency exit plan will help you and your family live more safely.

11 Deadly Mistakes When Applying for a Mortgage

"...avoid disappointment and SAVE thousands by taking a few minutes to acquaint yourself with these potential mistakes.."

Mortgage regulations have changed significantly over the last few years, making your options wider than ever. Subtle changes in the way you approach mortgage shopping, and even small differences in the way you structure your mortgage, can cost or save you literally thousands of dollars and years of expense.

Get the Right Information - Whether you are about to buy your first home, or are planning to make a move to your next home, it is critical that you be informed about the factors involved.

Everyday people have their mortgage loan turned down because of one or more of these mistakes. By taking these few minutes to acquaint yourself with the "11 Deadly Mistakes When Applying For A Mortgage" you can save thousands on your mortgage.

1. Not Knowing How Much Money You Can Put Down

   It's important to know how much you can afford to pay in down payment and closing costs when you apply for your mortgage. The more you put down the better rates and terms you're likely to get. At the same time you also need to stay within your means and comfort level.
   

2. Working With A Mortgage Broker Who Has A Poor Performance Record

   Industry insiders know that the most common reason that a sale fails to go through is that the mortgage fails to go through. Ask your mortgage broker about her/his performance guarantee.

3. Not Understanding The Process

   Most of us don't shop for a mortgage very often. As a result it isn't something we become familiar with. Work with a mortgage broker who will take the time to answer your questions and uses terms you understand.

4. Working With A Lender Who has Only One Investor

   Not all lenders have a range of options when it comes to investors. What if that investor doesn't offer the type of mortgage you need? Or worse yet, what if you need to change loan products after you've started the process? Working with a mortgage broker who has many investors enables you to address these issues without starting the process over again.

5. Making Large Purchases Prior to Your Mortgage Application

   Many people think that it is in their best interest to get large purchases completed prior to applying for their mortgage. As total debt is a key component in determining the amount of home you qualify for it is best to wait until after your home purchase has closed to make such purchases.

6. Over Shopping Your Loan

   Each time you call a lender seeking the best possible rate and terms you have your credit report pulled. Every time your credit report is pulled you risk decreasing your credit score and thus possibly decreasing the likelihood of getting the best rate and terms. Experts recommend that you select a mortgage broker with a number of investors and do your shopping with her/him.

7. Hiding Things From Your Mortgage Broker

   Most of us have experienced times of financial difficulty at some point. While it can be embarrassing to discuss issues like this, your mortgage broker is there to help you get loan approved despite such issues. Your mortgage broker can only help you with those things with which s/he is aware.

8. Making Late Payments

   Late payments, especially those within the last year, can be very detrimental to getting the best rate, terms and even the difference of being approved at all. While this might seem like unnecessary advice, ALWAYS pay on time.

9. Over Using Credit Cards

   Credit cards are a convenient way to make purchases, but if not paid off or balances kept low you might find it more difficult to get the best rates and terms on your mortgage. Keeping your total debt as low as possible helps you get the mortgage that best meets your specific needs.

10. Co-signing On Someone Else's Loan

    While it can be a great service to a friend or loved one, signing to guarantee someone else's loan is often a big head ache for the co-signer. Before co-signing you decide if you're willing and/or able to assume the liability.

11. Not Getting All The Facts

    It is important to learn the total cost of your mortgage loan, both at closing and for the life of the loan. While mortgages can look a lot alike there can be subtle differences which can save or cost you thousands of dollars. Get all the facts and know what to expect.